Port St Lucie, FL 34953
ph: (772)340-4667
fax: (772)340-4424
DarleenC
Laserlyte Lasers & Training Aids
This new laser trainer fits all of the most popular pistol calibers, mounts inside the barrel and has the sound activated switch showing bullet impact with a laser dot. Every time your hammer or striker fires, the small laser dot will flash for 100 milli-seconds simulating bullet impact.
This is the next evolution to the Laserlyte line of laser trainers. This model installs from the muzzle of the barrel and fits tight with the use of Laserlyte’s patented arbor and taper system. The system will fit the weapons chambered in 9mm, 40S&W, 45 ACP that have a minimum of a 2 inch barrel. The LT-Pro will also fit calibers 38 special, .380 Auto, 357 Sig, 10 mm and 45 LC.
The training possibilities are expanded with this model because the trainer will not extend past your muzzle more than .25 inches. This nearly flush mounted laser trainer makes it easier to train from the holster, concealment or close quarters. The mounting system will retain the laser firmly in the barrel during any reloading drills. (Laserlyte strongly recommends the use of snap caps)
This is simply the easiest way to train without ammo for any of your pistols with a 2-inch barrel or longer. The popular calibers listed above can be expensive and hard to find for regular practice. This is the most effective laser training system that will meet all your needs.
Key Points:
• Minimum 2-inch barrel required
• Fits calibers: 9mm, 40s&w, .45acp, 38sp, .380 Auto, 357sig, 10mm and 45lc.
• Near flush fitting to muzzle design
• Allows more advanced training scenarios
• Hammer or striker fired laser activation for 100 milli-seconds
• Patented adjustment system
Specifications:
• Length: 2.1 inches
• Minimum diameter: .1 inch
• Maximum Diameter: .5 inch
• Run Time: 3,000 shots • Batteries: 3 x 377
• Activation: Sound of striker or hammer
Model: LT-PRO

The .380acp Caliber-Specific Laser Trainer Cartridge is the most realistic training option in Laserlyte’s popular line of Laser Trainers, offering a revolutionary way to train almost anywhere and to practice numerous drills.
Designed to fit inside the pistol chamber, it features a firing-pin activated switch that indicates bullet impact with a bright red laser dot. Each Laser Trainer Cartridge easily installs into the firing chamber in seconds, works regardless of barrel length and does not stick out of the barrel. The Laser Trainer Cartridge activates for 100 milliseconds each time the firing pin strikes the cartridge. This modified cartridge is rimless, so the Laser Trainer Cartridge is not expelled during dry fire, which allows for tap, rack, bang or malfunction training drills. A hardened rubber plunger on the laser also acts as a built-in snap cap to protect the firing pin and two rubber rings on the laser help ensure a proper fit in order to best replicate bullet impact for accurate training.
For the cost of one or two visits to a local range, shooting enthusiasts can enjoy a lifetime of free training with the Laser Trainer Cartridge at the location that works best for them. The Laser Trainer Cartridge requires three 377 batteries, good for approximately 3,000 shots.
- Batteries: 3 x 377
- Battery Life: 3000 shots
- Weight: LT-380: 0.375 oz./11 g.
- Min. Diameter: LT-9: 0.34 in./9mm
- Max. Diameter: LT-9: 0.38 in./9.22mm
- Length: LT-380: 1.36 in./34.46mm
Model: LT-380
CLICK TO PURCHASE $79.99
The 9mm Caliber-Specific Laser Trainer Cartridge is the most realistic training option in Laserlyte’s popular line of Laser Trainers, offering a revolutionary way to train almost anywhere and to practice numerous drills.
Designed to fit inside the pistol chamber, it features a firing-pin activated switch that indicates bullet impact with a bright red laser dot. Each Laser Trainer Cartridge easily installs into the firing chamber in seconds, works regardless of barrel length and does not stick out of the barrel. The Laser Trainer Cartridge activates for 100 milliseconds each time the firing pin strikes the cartridge. This modified cartridge is rimless, so the Laser Trainer Cartridge is not expelled during dry fire, which allows for tap, rack, bang or malfunction training drills. A hardened rubber plunger on the laser also acts as a built-in snap cap to protect the firing pin and two rubber rings on the laser help ensure a proper fit in order to best replicate bullet impact for accurate training.
For the cost of one or two visits to a local range, shooting enthusiasts can enjoy a lifetime of free training with the Laser Trainer Cartridge at the location that works best for them. The Laser Trainer Cartridge requires three 377 batteries, good for approximately 3,000 shots.
- Batteries: 3 x 377
- Battery Life: 3000 shots
- Weight: LT-9: 0.375 oz./11 g.
- Min. Diameter: LT-9: 0.34 in./9mm
- Max. Diameter: LT-9: 0.38 in./9.7mm
- Length: LT-9: 1.35 in./34.5mm
Model: LT-9
The .40S&W Caliber-Specific Laser Trainer Cartridge is the most realistic training option in Laserlyte’s popular line of Laser Trainers, offering a revolutionary way to train almost anywhere and to practice numerous drills.
Designed to fit inside the pistol chamber, it features a firing-pin activated switch that indicates bullet impact with a bright red laser dot. Each Laser Trainer Cartridge easily installs into the firing chamber in seconds, works regardless of barrel length and does not stick out of the barrel. The Laser Trainer Cartridge activates for 100 milliseconds each time the firing pin strikes the cartridge. This modified cartridge is rimless, so the Laser Trainer Cartridge is not expelled during dry fire, which allows for tap, rack, bang or malfunction training drills. A hardened rubber plunger on the laser also acts as a built-in snap cap to protect the firing pin and two rubber rings on the laser help ensure a proper fit in order to best replicate bullet impact for accurate training.
For the cost of one or two visits to a local range, shooting enthusiasts can enjoy a lifetime of free training with the Laser Trainer Cartridge at the location that works best for them. The Laser Trainer Cartridge requires three 377 batteries, good for approximately 3,000 shots.
- Batteries: 3 x 377
- Battery Life: 3000 shots
- Weight: LT-40: 0.5 oz./12 g.
- Min. Diameter: LT-40: .39 in./9.86mm
- Max. Diameter: LT-40: .42 in./10.63mm
- Length: LT-40: 1.36 in./34.57mm
Model: LT-40
The .45ACP Caliber-Specific Laser Trainer Cartridge is the most realistic training option in Laserlyte’s popular line of Laser Trainers, offering a revolutionary way to train almost anywhere and to practice numerous drills.
Designed to fit inside the pistol chamber, it features a firing-pin activated switch that indicates bullet impact with a bright red laser dot. Each Laser Trainer Cartridge easily installs into the firing chamber in seconds, works regardless of barrel length and does not stick out of the barrel. The Laser Trainer Cartridge activates for 100 milliseconds each time the firing pin strikes the cartridge. This modified cartridge is rimless, so the Laser Trainer Cartridge is not expelled during dry fire, which allows for tap, rack, bang or malfunction training drills. A hardened rubber plunger on the laser also acts as a built-in snap cap to protect the firing pin and two rubber rings on the laser help ensure a proper fit in order to best replicate bullet impact for accurate training.
For the cost of one or two visits to a local range, shooting enthusiasts can enjoy a lifetime of free training with the Laser Trainer Cartridge at the location that works best for them. The Laser Trainer Cartridge requires three 377 batteries, good for approximately 3,000 shots.
- Batteries: 3 x 377
- Battery Life: 3000 shots
- Weight: LT-45: 0.625 oz./19 g.
- Min. Diameter: LT-45 – .44 in./11.19mm
- Max. Diameter: LT-45 – .47 in./12mm
- Length: LT-45 – 1.36 in./34.52mm
Model: LT-45
Laserlyte proudly debuts a new interactive Laser Trainer Target that records where a laser hits the target, to save shooters time, money and ammunition. For use with Laserlyte’s popular line of Laser Trainers including the original Laser Trainer, Laser Trainer Pro and new Laser Trainer Cartridge, the Laser Trainer Target is ideal for novice or professional shooters and even instructors.
Learn or teach shooting skills, such as unsighted fire, accuracy, grouping and trigger control. The Laser Trainer Target offers anyone the ability to practice shooting skills at almost any location, even a favorite recliner. Practice more often, become a more confident shooter and enjoy a lifetime of low-cost training with the Laserlyte Laser Trainer Target.
The Laser Trainer Target gives the user delayed shooting feedback, just like the shooting range, so the shooter can concentrate on the next shot instead of the last shot. To use the Laser Trainer Target simply aim at the target and dry fire the weapon with any Laserlyte Laser Trainer. To display impact, fire the laser at the red display circle on the face of the Laser Trainer Target. When finished, simply dry fire the laser aimed at the red reset circle to begin again with a fresh target.
At one-third the price of competitor’s interactive targets, the Laserlyte Laser Trainer Target operates with three AAA batteries, good for about 6,000 shots, and can register shots up to 50 yards away. The Laser Trainer Target contains 62 laser-activated LED lights and operates without use of a computer, television or projector.
Specifications:
- Compatible products: LT-PRO, LT-1, LT-9, LT-40, and LT-45
- Batteries: 3 AA batteries
- Battery Life: 6000 shots (LED activations)
- Weight: 1 lb 4 oz., 566.99 grams
- LxWxD: 9.5 in. x 6.25 in. x 2.0 in., 241.3mm x 158.75mm x 50.8mm
- Range of Usage: 50 yd.
Model: TLB-1
CLICK TO PURCHASE $139.99
We want you to have the best shopping experience possible. All items shown are items we use and recommend.
For assistance call (772)340-4667, 9:00am-8:00pm Eastern Time, 7-days a week. Closed Holidays. We accept Visa, MasterCard, Discover, Money Order or Check.
Laserlyte Sub-Compact V3 Rail Mount Laser
The Subcompact V3 laser by Laserlyte® is the company’s most state-of-the-art, smallest and versatile rail mounted laser to date. Now half the size of the previous model, the Subcompact V3 needs less than ¾-inch of Picatinny rail space to easily mount onto even the smallest firearms, including the Walther P22.
Constructed of T6 aluminum for extra strength and durability, this updated unit offers a smart, cost-effective auto-off feature. If left on for five minutes, the unit begins to display a unique flash for one minute, indicating to the user that the unit will automatically shut off soon. After one minute in flash mode the unit shuts itself off to extend battery life, prevent accidental activation and battery depletion. Press the unit’s button at any time to reset this feature for five more minutes.
The Subcompact V3 easily mounts with a hex drive crossbar screw and features windage adjustment, elevation adjustment and programmable constant on and pulse modes. Additionally, the unit is ideal for left- and -right handed shooters with two separate activation buttons located on the backside of the laser. Not only will the laser fit nicely on the smallest of sub-compact railed pistols, it works great on modern rifles as well.
The Subcompact V3 laser is powered by four 377 batteries that provide five hours in constant on mode and ten hours in pulse mode of normal usage. Normal usage is defined as one minute on and one minute off. This test mimics actual usage where the unit is turned on and off and the battery is given time to automatically regenerate.
Specifications:
- Compatible Firearms: Any firearm with a minimum of .70 inches rail space
- Laser module: 650nm
- Laser modes: constant on, pulse and auto-off
- Batteries: 4-377 batteries
- Battery Life: 5 hours constant on (actual usage), 10 hours pulse (actual usage)
- Material: 6061 T6 aluminum
- Weight: .50 oz., 15 g
- Length/Width/Height: .92 in./.69 in./.20 in., 23.37 mm/ 17.53 mm/ 5.08 mm
- Range at Night: 500 yd., 457.2 m
Model: FSL-3
Laserlyte Side Mount Laser Line for Taurus Revolvers

The Side Mount Laser (SML) fits nearly all Taurus® revolvers including the Judge, CIA, Protector and Raging Bull series. The new and inventive SML is easily mounted underneath the rubber grip of the revolver and is the only laser system available that allows the customer to use factory or custom grips and holster the firearm. This is especially exciting for Judge owners because the SML allows the user to utilize a laser, retain the factory Ribber Grips® that reduce felt recoil and holster the firearm.
To install the SML simply choose one of two included base plates that fits the revolver, temporarily remove the grip and screw the unit into place. Sight in is simple with common X and Y adjustments. The SML’s activation switch is strategically placed at the back of the laser and is easily turned on by pressing the button on draw or when holstered. First press of the button produces constant on mode, second press produces pulse mode and third press deactivates the laser. The SML also has a customer-requested auto-off feature that displays a unique flash after five minutes of operation and automatically turns the unit off after six minutes. Press the button at any time to reset this feature that prevents accidental activation and battery depletion. The unit is also easily moved from one Smith & Wesson J-frame revolver to another.
The compact base unit contains all components necessary for operation – laser, switch, battery and circuitry. The unit body is constructed from 380A die cast aluminum and the plates are made of 4130 hardened chromoly steel. The SML is powered by four 377 batteries that provide five hours of normal usage in constant on mode and ten hours in pulse mode. Normal usage is defined as one minute on and one minute off. This test mimics actual usage where the unit is turned on and off and the battery is given time to automatically regenerate. We offer discounted batteries on our website.
Specifications:
- Compatible Firearms: Fits most Taurus revolvers with rubber grips
- Power Output: Class IIIA, 5mw
- Laser module: 650nm
- Batteries: four 377 batteries
- Battery Life: 5 hrs. constant on, 10 hrs. pulse mode (normal usage)
- Weight (with plate): .875 oz., 23 g
- Length/Width/Height: .85 in./.42 in./1 in., 21.59 mm/ 10.67 mm/ 25.40 mm
- Range at Night: 500 yd., 457.2 m
Model: CK-TA
Laserlyte Side Mount Laser Line for Smith & Wesson J-Frame Revolvers

The Side Mount Laser (SML) line now offers a unit that fits all Smith & Wesson® J-frame revolvers including 637 and 642 models. The new and inventive SML is easily mounted underneath the rubber grip of the revolver and is the only laser system available that allows the customer to retain the factory grip and holster the firearm. The SML will also work with many popular aftermarket rubber grips such as Hogue® or Pachmayr® brands.
To install the SML simply choose one of two included base plates that fits the revolver, temporarily remove the grip and screw the unit into place. Sight in is simple with common X and Y adjustments. The SML’s activation switch is strategically placed at the back of the laser and is easily turned on by pressing the button on draw or when holstered. First press of the button produces constant on mode, second press produces pulse mode and third press deactivates the laser. The SML also has a customer-requested auto-off feature that displays a unique flash after five minutes of operation and automatically turns the unit off after six minutes. Press the button at any time to reset this feature that prevents accidental activation and battery depletion. The unit is also easily moved from one Smith & Wesson J-frame revolver to another.
The compact base unit contains all components necessary for operation – laser, switch, battery and circuitry. The unit body is constructed from 380A die cast aluminum and the plates are made of 4130 hardened chromoly steel. The SML is powered by four 377 batteries that provide five hours of normal usage in constant on mode and ten hours in pulse mode. Normal usage is defined as one minute on and one minute off. This test mimics actual usage where the unit is turned on and off and the battery is given time to automatically regenerate. Laserlyte offers discounted batteries on its website.
Specifications:
- Compatible Firearms: Fits all Smith & Wesson J-frame revolvers with rubber grips
- Power Output: Class IIIA, 5mw
- Laser module: 650nm
- Batteries: four 377 batteries
- Battery Life: 5 hrs. constant on, 10 hrs. pulse mode (normal usage)
- Weight (with plate): .875 oz., 23 g
- Length/Width/Height: .85 in./.42 in./1 in., 21.59 mm/ 10.67 mm/ 25.40 mm
- Range at Night: 500 yd., 457.2 m
Model: CK-SW
New and Improved Laserlyte Laser Bore Sight
Save time, money and ammunition with the new and improved Laserlyte® Laser Bore Sight. Incorporating Laserlyte’s patented one-piece design and caliber-fitting systems the new Laser Bore Sight is fifty percent smaller than the previous model. This easy-to-use product can get a shooter within three to four inches of the bull’s-eye at 100 yards in about three shots.
Constructed from tough T6 aluminum, the Laser Bore Sight comes in a sleek red finish and works great on any weapon with at least three inches of barrel length. The Laser Bore Sight makes sight-in sessions a breeze for scopes, lasers or iron sights on any firearm from .22 to .50 caliber with included adapters.
For maximum versatility the system also works with new accessories (sold separately), including a shotgun adapter for .50 to .75 caliber and improved scope leveler. The Laser Bore Sight activates with a roll switch and is powered by three 393 batteries that provide one and a half hours of continuous use. This unit is also excellent for modern rifles and its modest design works great with most flash suppressors and muzzle breaks.
SPECIFICATIONS:
- Compatible Firearms: .22 - .50 Caliber, minimum 3-inch barrel
- Power Output: Class IIIA, 5mw
- Laser module: 650nm
- Batteries: 3-393 batteries
- Battery Life: 1.5 hours constant on
- Material: 6061 T6 aluminum
- Weight: .75 oz., 20 g
- Length/Max., Dia./Min. Dia./Height: 5 in./.52 in./.20 in., 129 mm/ 13.25 mm/ 5 mm
- Range at Night: 500 yd., 457.2 m
Model: MBS-1
CLICK TO PURCHASE $49.99
Laserlyte #377 Replacement Battery 12-pack
One dozen #377 replacement batteries for the Laserlyte LT-Pro Trainer and Laserlyte training Cartridges.
Model: #377
Quantity: 12-pack
Laserlyte Shotgun Tri-Rail Mounting System
Set up your tactical or home defense shotgun for maximum versatility and low light performance with this new Tri-Rail Mounting System. Lightweight and durable, this system positions three Picatinny rails at the front end of the shotgun where flashlights and/or lasers are best located. Easily mounted on the magazine tube of most popular 12-gauge pump shotguns, the Tri-Rail takes up under 1.5 inches of space ahead of the forearm. Made of tough aircraft grade aluminum with a matte black anodized finish, the Tri-Rail attaches in minutes with two machine screws.
SPECIFICATIONS:
- Compatible Firearms: Any 1" Diameter tube
- Compatible Tool: FSL or LRS
- Material: 6061 T6 aluminum
- Weight: 2 oz.
- Length: 1.5"
Model: ADP-TRIR-140
Copyright 2011 R & D Personal Protection. All rights reserved.
Port St Lucie, FL 34953
ph: (772)340-4667
fax: (772)340-4424
DarleenC